SHOP FOR
http://base-store.storehippo.com/
# 2514/U, 7th 'A' Main Road, Opp. to BBMP Swimming Pool, Hampinagar, Vijayanagar 2nd Stage. 560104 Bangalore IN
Tenettech E-Store
# 2514/U, 7th 'A' Main Road, Opp. to BBMP Swimming Pool, Hampinagar, Vijayanagar 2nd Stage. Bangalore, IN
+918023404924 https://www.tenettech.com/s/59c9e4669bd3e7c70c5f5e6c/ms.settings/5256837ccc4abf1d39000001/59dafe26aef6e1d20402c4c3-480x480.png" [email protected]
6892ed18a2da328a91e08b4e Raspberry Pi Camera Module 3 https://www.tenettech.com/s/59c9e4669bd3e7c70c5f5e6c/6892ed19a2da328a91e08b50/raspberry-pi-camera-module-3_raspberry-pi-official-accessories_55274_1.jpg

After a long wait of almost 7 years, the Raspberry Pi released the camera-3 series, the successor to the Camera module 2 series. This newest addition to the Raspberry Pi mainstream camera lineup replaces the wildly successful Camera Module 2, which was introduced in April 2016.

The all-new Raspberry Pi Camera Module 3 Standard/Wide is a camera for Raspberry Pi computers. Featuring autofocus and a 12-megapixel sensor supported by Raspberry Pi’s Picamera2 Python library, Camera Module 3 gives you excellent image quality with precise control.
Camera Module 3 came up with significant improvements over Camera Module 2, which is built around a 12-megapixel Sony IMX708 image sensor. Additionally, Camera Module 3 is offered with a normal (76°) or wide-angle (120°) lens, as well as in regular and infrared-sensitive (NoIR) versions.

  • The standard variant is designed to take pictures in normal light.
  • The NoIR variant doesn’t have an infrared filter, so you can use it together with an infrared light source to take pictures in the dark.

Below is the short spec comparison of all variants:

Raspberry Pi comparisn chart


Features:

  • Back-illuminated and stacked CMOS 12-megapixel image sensor (Sony IMX708)
  • High signal-to-noise ratio (SNR)
  • Built-in 2D Dynamic Defect Pixel Correction (DPC)
  • Phase Detection Autofocus (PDAF) for rapid autofocus
  • QBC Re-mosaic function
  • HDR mode (up to 3-megapixel output)
  • CSI-2 serial data output
  • 2-wire serial communication (supports I2C fast mode and fast-mode plus)
  •  2-wire serial control of focus mechanism
  • Improved low-light sensitivity.
  • High dynamic range (HDR) support.
  • Sony IMX708 12MP sensor with 12C-controlled focus actuator
  • Large 7.4mm diagonal sensor
  • Resolution: 12 Megapixel
  • Diagonal Viewing Angle: 76º
  • Compatible with all models of Raspberry Pi*

 

*Note: To connect with Raspberry Pi Zero models this camera requires a special camera cable. Buy Now


Useful Link:

https://www.raspberrypi.com/documentation/computers/camera_software.html


Package Includes:

1 x Raspberry Pi Camera Module 3


Links to all Variants:

SKUProduct NameClick to Open
1441079Raspberry pi Camera 3View
1445416Raspberry pi Camera 3 NoirView
1445417Raspberry pi Camera 3 Wide NoirView
1445388Raspberry pi Camera 3 WideView
1445389Raspberry pi HQ Camera – M12 MountView

 

TT-RB-1441079
in stockINR 3764
1 1
Raspberry-Pi-Camera-Module-3_Raspberry-Pi-Official-Accessories_55274_1.jpeg

Raspberry Pi Camera Module 3

Sku: TT-RB-1441079
₹3,764


Sold By: tenettech
Features
  • Shipping in 10-12 Working Days

Description of product

After a long wait of almost 7 years, the Raspberry Pi released the camera-3 series, the successor to the Camera module 2 series. This newest addition to the Raspberry Pi mainstream camera lineup replaces the wildly successful Camera Module 2, which was introduced in April 2016.

The all-new Raspberry Pi Camera Module 3 Standard/Wide is a camera for Raspberry Pi computers. Featuring autofocus and a 12-megapixel sensor supported by Raspberry Pi’s Picamera2 Python library, Camera Module 3 gives you excellent image quality with precise control.
Camera Module 3 came up with significant improvements over Camera Module 2, which is built around a 12-megapixel Sony IMX708 image sensor. Additionally, Camera Module 3 is offered with a normal (76°) or wide-angle (120°) lens, as well as in regular and infrared-sensitive (NoIR) versions.

  • The standard variant is designed to take pictures in normal light.
  • The NoIR variant doesn’t have an infrared filter, so you can use it together with an infrared light source to take pictures in the dark.

Below is the short spec comparison of all variants:

Raspberry Pi comparisn chart


Features:

  • Back-illuminated and stacked CMOS 12-megapixel image sensor (Sony IMX708)
  • High signal-to-noise ratio (SNR)
  • Built-in 2D Dynamic Defect Pixel Correction (DPC)
  • Phase Detection Autofocus (PDAF) for rapid autofocus
  • QBC Re-mosaic function
  • HDR mode (up to 3-megapixel output)
  • CSI-2 serial data output
  • 2-wire serial communication (supports I2C fast mode and fast-mode plus)
  •  2-wire serial control of focus mechanism
  • Improved low-light sensitivity.
  • High dynamic range (HDR) support.
  • Sony IMX708 12MP sensor with 12C-controlled focus actuator
  • Large 7.4mm diagonal sensor
  • Resolution: 12 Megapixel
  • Diagonal Viewing Angle: 76º
  • Compatible with all models of Raspberry Pi*

 

*Note: To connect with Raspberry Pi Zero models this camera requires a special camera cable. Buy Now


Useful Link:

https://www.raspberrypi.com/documentation/computers/camera_software.html


Package Includes:

1 x Raspberry Pi Camera Module 3


Links to all Variants:

SKUProduct NameClick to Open
1441079Raspberry pi Camera 3View
1445416Raspberry pi Camera 3 NoirView
1445417Raspberry pi Camera 3 Wide NoirView
1445388Raspberry pi Camera 3 WideView
1445389Raspberry pi HQ Camera – M12 MountView