SHOP FOR
https://www.tenettech.com
# 2514/U, 7th 'A' Main Road, Opp. to BBMP Swimming Pool, Hampinagar, Vijayanagar 2nd Stage. 560104 Bangalore IN
Tenettech E-Store
# 2514/U, 7th 'A' Main Road, Opp. to BBMP Swimming Pool, Hampinagar, Vijayanagar 2nd Stage. Bangalore, IN
+918023404924 https://cdn1.storehippo.com/s/59c9e4669bd3e7c70c5f5e6c/ms.settings/5256837ccc4abf1d39000001/webp/59dafe26aef6e1d20402c4c3-480x480.png" info@tenettech.com
5e2929b2f3bedc38d2926bac 18650 BATTERY CHARGE HOLDER V3 0.5A USB TYPE-A CHARGING PROTECTION BOARD FOR RASPBERRY PI https://cdn1.storehippo.com/s/59c9e4669bd3e7c70c5f5e6c/ms.products/5e2929b2f3bedc38d2926bac/images/5e2929b2f3bedc38d2926bad/5e292988935aa1388779f223/webp/5e292988935aa1388779f223.jpg

Description

The 18650 battery shield holder V3 development board compatible for Arduino, Raspberry Pi,esp8266 or Sensors with protection.The output current can reach upto 2A

Features

  • This module is suitable for 18650 battery only

  • over-charging protection and over-discharge protection

  • Micro USB port Charging Input

  • A type USB Output

  • Charge current: 0.5A

  • 1 switches to control the USB output

  • Input voltage: 5 ~ 8V

  • Three 3V 1A output interface 

  • Three 5V 2A output interface

  • LED light, green for full of charge, red for under charging

  • Follow the direction "+" "-" on the PCB

TT-RKK-2535
in stockINR 462
GENERIC
1 1
XYZ Blog title
ABC Blog title here
18650 BATTERY CHARGE HOLDER V3 0.5A USB TYPE-A CHARGING PROTECTION BOARD FOR RASPBERRY PI

Description of product

Description

The 18650 battery shield holder V3 development board compatible for Arduino, Raspberry Pi,esp8266 or Sensors with protection.The output current can reach upto 2A

Features

  • This module is suitable for 18650 battery only

  • over-charging protection and over-discharge protection

  • Micro USB port Charging Input

  • A type USB Output

  • Charge current: 0.5A

  • 1 switches to control the USB output

  • Input voltage: 5 ~ 8V

  • Three 3V 1A output interface 

  • Three 5V 2A output interface

  • LED light, green for full of charge, red for under charging

  • Follow the direction "+" "-" on the PCB