SHOP FOR
https://www.tenettech.com
# 2514/U, 7th 'A' Main Road, Opp. to BBMP Swimming Pool, Hampinagar, Vijayanagar 2nd Stage. 560104 Bangalore IN
Tenettech E-Store
# 2514/U, 7th 'A' Main Road, Opp. to BBMP Swimming Pool, Hampinagar, Vijayanagar 2nd Stage. Bangalore, IN
+918023404924 https://cdn1.storehippo.com/s/59c9e4669bd3e7c70c5f5e6c/ms.settings/5256837ccc4abf1d39000001/webp/59dafe26aef6e1d20402c4c3-480x480.png" info@tenettech.com
5b71695ee0e8e4d115f3485f RFID Reader Module TTL https://cdn1.storehippo.com/s/59c9e4669bd3e7c70c5f5e6c/ms.products/5b71695ee0e8e4d115f3485f/images/5b71695ee0e8e4d115f34860/5b716941be9e92d093406df6/webp/5b716941be9e92d093406df6.jpg

Product Details

Range8 to 10cm
BaseEM18 RFID Module
ApplicationTo read our RFID cards
Power+5V DC
Onboard indicationsonboard power indication LED, a LED and Buzzer

Description

 This board uses the EM18 RFID Module. It can be used to read our RFID cards. Using the board with micro controllers to read a card's data is very simple and required just a serial connection. The board should be powered at 5V, and it requires a direct connection to the micro controller's Serial Rx pin. The card data is transmitted over the serial line when the card is brought near the module.

 The board has an onboard power indication LED, a LED and Buzzer to indicate the presence of a RFID Card. All the IO pins are brought out to standard clearly labeled header pins, which simplify prototyping time and effort. An output pin (DET) also indicates the presence of a RFID card. The board can also be used to output data in Wiegand format. It can detect cards in the range of 8-10cm.

TT-RG-222
in stockINR 575
GENERIC
1 1
XYZ Blog title
ABC Blog title here
RFID Reader Module TTL

Description of product

Product Details

Range8 to 10cm
BaseEM18 RFID Module
ApplicationTo read our RFID cards
Power+5V DC
Onboard indicationsonboard power indication LED, a LED and Buzzer

Description

 This board uses the EM18 RFID Module. It can be used to read our RFID cards. Using the board with micro controllers to read a card's data is very simple and required just a serial connection. The board should be powered at 5V, and it requires a direct connection to the micro controller's Serial Rx pin. The card data is transmitted over the serial line when the card is brought near the module.

 The board has an onboard power indication LED, a LED and Buzzer to indicate the presence of a RFID Card. All the IO pins are brought out to standard clearly labeled header pins, which simplify prototyping time and effort. An output pin (DET) also indicates the presence of a RFID card. The board can also be used to output data in Wiegand format. It can detect cards in the range of 8-10cm.