SHOP FOR
http://base-store.storehippo.com/
# 2514/U, 7th 'A' Main Road, Opp. to BBMP Swimming Pool, Hampinagar, Vijayanagar 2nd Stage. 560104 Bangalore IN
Tenettech E-Store
# 2514/U, 7th 'A' Main Road, Opp. to BBMP Swimming Pool, Hampinagar, Vijayanagar 2nd Stage. Bangalore, IN
+918023404924 https://cdn1.storehippo.com/s/59c9e4669bd3e7c70c5f5e6c/ms.settings/5256837ccc4abf1d39000001/webp/59dafe26aef6e1d20402c4c3-480x480.png" info@tenettech.com
5a9a6fd1ff626e83b7d7c372 FLAME click https://cdn1.storehippo.com/s/59c9e4669bd3e7c70c5f5e6c/ms.products/5a9a6fd1ff626e83b7d7c372/images/5a9a6fd1ff626e83b7d7c373/5a9a6f080c48d18442e8ba6b/webp/5a9a6f080c48d18442e8ba6b.jpg

Description

Flame click is a fire detection solution. It carries a PT334-6B silicon phototransistor that’s covered in black epoxy and therefore sensitive only to infrared light. To use it as a fire alarm, set up the exact detection threshold through the onboard potentiometer (once reached, the click will send an interrupt to the target board MCU through the mikroBUS INT pin). Othewise the sensor can also output a continuous analog signal through the mikroBUS AN pin. Flame click can use both a 3.3V or a 5V power supply.

Specification

Type Optical
Applications Properly calibrated, Flame click can be used for designing devices for a variety of security applications. Fire detectors based on phototransistors have a faster reaction time compared to smoke or heat detectors
On-board modules PT334-6B
Key Features Onboard potentiometer. Phototransistor covered in black epoxy. Uses AN and INT mikroBUS lines
Key Benefits Fast reaction time
Interface Analog,GPIO
Input Voltage 3.3V or 5V
Compatibility mikroBUS
Click board size M (42.9 x 25.4 mm)



    TT-MK-MIKROE-1820
    in stock INR 1218
    MIKROELECTRONICA
    1 1
    XYZ Blog title
    ABC Blog title here
    FLAME click

    Description of product

    Description

    Flame click is a fire detection solution. It carries a PT334-6B silicon phototransistor that’s covered in black epoxy and therefore sensitive only to infrared light. To use it as a fire alarm, set up the exact detection threshold through the onboard potentiometer (once reached, the click will send an interrupt to the target board MCU through the mikroBUS INT pin). Othewise the sensor can also output a continuous analog signal through the mikroBUS AN pin. Flame click can use both a 3.3V or a 5V power supply.

    Specification

    Type Optical
    Applications Properly calibrated, Flame click can be used for designing devices for a variety of security applications. Fire detectors based on phototransistors have a faster reaction time compared to smoke or heat detectors
    On-board modules PT334-6B
    Key Features Onboard potentiometer. Phototransistor covered in black epoxy. Uses AN and INT mikroBUS lines
    Key Benefits Fast reaction time
    Interface Analog,GPIO
    Input Voltage 3.3V or 5V
    Compatibility mikroBUS
    Click board size M (42.9 x 25.4 mm)