This is XH-W1219 12V Digital Red+Green Display Temperature Controller Module W/ NTC Waterproof Temperature Sensor. The XH-W1219 thermostat module with its µC and I/O (sensor input, keys, double display, relay) can be re-programmed for automation tasks, and it’s easy to work with.
Digital thermostat module. The temperature controller/switch with waterproof NTC probe and integrated LED display in red and green.
Note: This board is Nuvoton based.
P0(Temperature Control Mode)
»When first use this product; if you are using it for heating, please set H, if using it for cooling, please set C
P1(Return Difference Setting)
»Long press SET key entering into the internal setting, choose P1 setting; then press SET key to achieve return difference value setting
P2(Temperature Calibration)
»This function is for temperature calibration. If detection temperature and the actual temperature is different, then users can apply this function to calibrate
P3(Delay Start)
»This function is for compressor cooling
P4(Set High-Temperature Alarm Value)
»When the actual temperature is higher than this value, the screen will flash and sound an alarm
1 x 12V Digital Red+Green Display Temperature Controller Module
1 x NTC Waterproof Temperature Sensor
This is XH-W1219 12V Digital Red+Green Display Temperature Controller Module W/ NTC Waterproof Temperature Sensor. The XH-W1219 thermostat module with its µC and I/O (sensor input, keys, double display, relay) can be re-programmed for automation tasks, and it’s easy to work with.
Digital thermostat module. The temperature controller/switch with waterproof NTC probe and integrated LED display in red and green.
Note: This board is Nuvoton based.
P0(Temperature Control Mode)
»When first use this product; if you are using it for heating, please set H, if using it for cooling, please set C
P1(Return Difference Setting)
»Long press SET key entering into the internal setting, choose P1 setting; then press SET key to achieve return difference value setting
P2(Temperature Calibration)
»This function is for temperature calibration. If detection temperature and the actual temperature is different, then users can apply this function to calibrate
P3(Delay Start)
»This function is for compressor cooling
P4(Set High-Temperature Alarm Value)
»When the actual temperature is higher than this value, the screen will flash and sound an alarm
1 x 12V Digital Red+Green Display Temperature Controller Module
1 x NTC Waterproof Temperature Sensor
Subscribe to get Email Updates!
Thanks for subscribe.
Your response has been recorded.
Tenet Technetronics focuses on “Simplifying Technology for Life” and has been striving to deliver the same from the day of its inception since 2007. Founded by young set of graduates with guidance from ardent professionals and academicians the company focuses on delivering high quality products to its customers at the right cost considering the support and lifelong engagement with customers. “We don’t believe in a sell and forget model “and concentrate and building relationships with customers that accelerates, enhances as well as provides excellence in their next exciting project.