UCTRONICS ESP8266 ESP-12E IoT Weather Station 0.96" OLED DHT11 for Arduino IDE

Description of product

UCTRONICS ESP8266 Weather Station IoT Starter Kit gets the current and forecast weather information from an online service and displays the expected conditions on a 128X64 pixels OLED display with nice icons. The program uses a side scrolling carousel to display the date, time. In addition, it displays the information about 3-day forecast temperature and humidity through DHT11 sensor.


ESP8266 ESP-12E Development Board

  • 802.11 b/g/n protocol 
  • Wi-Fi Direct (P2P), soft-AP 
  • Integrated TCP/IP protocol stack 
  • Integrated TR switch, balun, LNA, power amplifier and matching network 
  • Integrated PLL, regulators, and power management units 
  • +19.5dBm output power in 802.11b mode 
  • Integrated temperature sensor 
  • Supports antenna diversity 
  • Power down leakage current of < 10uA 
  • Integrated low power 32-bit CPU could be used as application processor 
  • SDIO 2.0, SPI, UART 
  • STBC, 1x1 MIMO, 2x1 MIMO 
  • A-MPDU & A-MSDU aggregation & 0.4 s guard interval 
  • Wake up and transmit packets in < 2ms 
  • Standby power consumption of < 1.0mW (DTIM3) 
0.96" 128x64 pixel OLED display 
  • Size: 0.96'' 
  • Resolution: 128X64 
  • Supported platforms: for Arduino, ESP series, 51 series, MSP430 series, STIM32 / 2, SCR chips 
  • Driver IC: SSD1306 
  • Communication: IIC 
  • VCC: 3.3~5V 
  • GND: Ground 
  • SCL: Serial Clock 
  • SDA: Serial Data 
DHT11 Temperature and Humidity Sensor 
  • Digital signal output 
  • VCC: 3.3V~5V 
  • GND: Ground 
  • DATA: MCU IO port 
  • Tips: Do not reverse the VCC and GND, otherwise it will burn! 
Package Including
  • 1pcs ESP8266 ESP-12E Development Board
  • 1pcs 0.96" OLED display
  • 1pcs DHT11 Temperature and Humidity Sensor
  • 1pcs 40x10cm female-female jumpers
  • 1pcs USB cable