Turtle Kit: A 2WD DIY Arduino Robotics Kit For Beginner
Turtle Kit: A 2WD DIY Arduino Robotics Kit For Beginner

Description of product

INTRODUCTION

The Turtle 2WD DIY Robotics building kit is a entry level programmable robot kit based on Arduino. It is base

With just a few simple steps of assembling the hardware and tuning the software, and you'll learn all about Arduino, robotics, sensors, bluetooth communication — as well as obstacle avoidance and remote controlling. You can also take it further with your own code to take advantage of the ultrasonic sensor, Romeo ( a Bluetooth 4.0 (BLE) Arduino Microcontroller ) , IR  distance sensors and LEDs.


The Turtle 2WD Mobile Platform is a small, low-cost mobile platform compatible with standard Arduino microcontrollers. It contains two drive motors, wheels (and rear caster ball), frame and all mounting hardware. It is widely used as self-developed control chasis for Arduino platforms and other control boards. The Turtle 2WD has multiple features such as: two differential drives, near zero turning radius, high-strength aluminum alloy body material, motors and a flexible rubber wheel makes it suitable for indoor flat road surface and flat-platform robot competitions. The top layer includes a standard servo socket and the three optional sensor holder. This three sensor holder fits with our adjustable IR range sensor. The servo can be used for a simple rotation platform, a two degrees of freedom camera holder or even a robotic arm. 

Thanks to Romeo BLE, the kit can be controllered by APP (IOS).  Simply download an APP (GoBLE) to enjoy the control from your IOS device. 

 



 

 

SPECIFICATION

  • Controller:  Romeo-BLE
  • Microcontroller: ATmega328P
  • Board: Arduino UNO
  • Controller Operating Voltage: 5V
  • Controller Input Voltage (recommended): 7 ~ 12V 
  • Ultrasonic Sensor Detecting range: 4cm-3m (3-5m is possible, but depending on situations)
  • Rotation range: 0 - 180
  • Size(Assembled): 165mm(diameter)*128mm(6.50"*5.04")
  • Weight: 480g(Excluding battery)
  • Maximum Load: 500g

DOCUMENTS

SHIPPING LIST
 

 Romeo BLE (Arduino Compatible Atmega 328)(DFR0305)  1 
 DF05BB Standard Servo (5kg)   (SER0020)  1
 URM37 V4.0 Ultrasonic Sensor  (SEN0001)  1
 URM ultrasound mounting bracket (FIT0006)  1
 Turtle 2WD chassis   1
 Infrared proximity switch bracket (FIT0032)  1
 5xAA battery holder   1
 PH-2.0 to DC-2.2 adapter  1
 Screws KIT   1
 Micro DC Geared Motors  (FIT0016)   2
 Motor Wire   1
 Rubber Wheels (FIT0003)         2
 Jumper Wires 9" F/F (10 Pack)  (FIT0030)  1
 Magnet Micro USB Cable 1.2m ( FIT0351-OE)  1