SHOP FOR
http://base-store.storehippo.com/
# 2514/U, 7th 'A' Main Road, Opp. to BBMP Swimming Pool, Hampinagar, Vijayanagar 2nd Stage. 560104 Bangalore IN
Tenettech E-Store
# 2514/U, 7th 'A' Main Road, Opp. to BBMP Swimming Pool, Hampinagar, Vijayanagar 2nd Stage. Bangalore, IN
+918023404924 https://cdn1.storehippo.com/s/59c9e4669bd3e7c70c5f5e6c/ms.settings/5256837ccc4abf1d39000001/webp/59dafe26aef6e1d20402c4c3-480x480.png" info@tenettech.com
6055d1a4f0f5ae50c54b8046 Teensy Header Kit https://cdn1.storehippo.com/s/59c9e4669bd3e7c70c5f5e6c/6055c4c868a20e641afa41cb/webp/13925-01.jpg

Description:

These headers are made to work with the Teensy 4.0, Teensy 3.2, and Teensy LC development boards. Each kit of headers makes your Teensy breadboard compatible and will allow for stacking a Teensy and Teensy-compatible shield board. This kit includes five headers (two 13-pin, one 7-pin, one 3-pin, and one 2x7 right-angle SMT), enough to connect your chosen Teensy in any configuration you need!

Note: This Header Kit can also be used for the Teensy 3.0 and 3.1, as the pin layout has not changed between the three versions.

Includes

  • 2x 13-pin stackable header
  • 1x 7-pin female header (for pins on end)
  • 1x 3-pin header (for 3-off grid holes)
  • 1x 2x7 right-angle SMT header, for the surface mount pads on the back of the Teensy 3.2
TT-SFS-PRT-13925
in stockINR 188.8
SparkFun
1 1
Teensy Header Kit

Teensy Header Kit

Sku: TT-SFS-PRT-13925
₹188.8


Sold By: tenettech
Features
  • 1 No in READY STOCK

Description of product

Description:

These headers are made to work with the Teensy 4.0, Teensy 3.2, and Teensy LC development boards. Each kit of headers makes your Teensy breadboard compatible and will allow for stacking a Teensy and Teensy-compatible shield board. This kit includes five headers (two 13-pin, one 7-pin, one 3-pin, and one 2x7 right-angle SMT), enough to connect your chosen Teensy in any configuration you need!

Note: This Header Kit can also be used for the Teensy 3.0 and 3.1, as the pin layout has not changed between the three versions.

Includes

  • 2x 13-pin stackable header
  • 1x 7-pin female header (for pins on end)
  • 1x 3-pin header (for 3-off grid holes)
  • 1x 2x7 right-angle SMT header, for the surface mount pads on the back of the Teensy 3.2