Measuring only 37mm by 39mm, the MYC-Y6ULX CPU Module is covered with shield and powered by NXP i.MX 6UltraLite/6ULL processor based on the ARM Cortex-A7 architecture. With a choice of G2 and Y2 sub family processors running at 528MHz and integrated with 256MB DDR3 and 256MB Nand Flash (4GB eMMC Flash is optional), the MYC-Y6ULX module delivers high performance with ultra-efficient power that targets Industry Control, Communications, HMI, Smart Healthcare and Internet of Things (IoT) applications. It carries out as many as peripheral signals and IOs through 1.0mm pitch 140-pin stamp hole expansion interface to allow customer’s extension for their next embedded design. The module is ready to run Linux and can support industrial operating temperature range from -40 to +85 Celsius. MYC-Y6ULX CPU Module MYIR also offers a development board MYD-Y6ULX which is built around the MYC-Y6ULX CPU Module with a specially designed base board. A variety of peripheral interfaces have been brought out to the base board through headers and connectors including serial ports, two USB Host, one USB OTG, two 10/100Mbps Ethernet, CAN, Camera, LCD, Audio, TF card as well as a Mini PCIe interface for 4G LTE Module. The board also has an integrated WiFi Module with external antenna to allow wireless communications. Along with some cable accessories, the MYD-Y6ULX is a complete evaluation platform and reference design for development based on i.MX 6UL/6ULL processors. MYD-Y6ULX Development Board Features Mechanical Parameters - Dimensions: 37mm x 39mm
- PCB Layers: 8-layer design
- Power supply: 3.3V/0.3A
- Working temperature: 0~70 Celsius (commercial grade) or -40~85 Celsius (industrial grade)
OS Support Processor - 528MHz NXP i.MX 6UltraLite / i.MX 6ULL ARM Cortex-A7 processor
(MCIMX6G2CVM05AB or MCIMX6Y2DVM05AA by default)
Memory - 256MB DDR3 SDRAM (supports up to 1GB)
- 256MB Nand Flash (4GB eMMC Flash is optional)
Peripherals and Signals Routed to Pins - One 10/100M Ethernet PHY
- 1.0mm pitch 140-pin stamp hole expansion interface
- 2 x 10/100Mbps Ethernet
- 8 x Serial ports
- 4 x I2C
- 2 x CAN
- 4 x SPI
- 8 x ADC
- 8 x PWM
- 3 x I2S
- 1 x Parallel Camera Sensor Interface
- 1 x JTAG
- 1 x 24-bit LCD interface
- Up to 97 x GPIOs
|
