SHOP FOR
http://base-store.storehippo.com/
# 2514/U, 7th 'A' Main Road, Opp. to BBMP Swimming Pool, Hampinagar, Vijayanagar 2nd Stage. 560104 Bangalore IN
Tenettech E-Store
# 2514/U, 7th 'A' Main Road, Opp. to BBMP Swimming Pool, Hampinagar, Vijayanagar 2nd Stage. Bangalore, IN
+918023404924 https://cdn1.storehippo.com/s/59c9e4669bd3e7c70c5f5e6c/ms.settings/5256837ccc4abf1d39000001/webp/59dafe26aef6e1d20402c4c3-480x480.png" info@tenettech.com
5ff803aa9837c4564362aa11 MODULE MICRO SERIAL JPEG CAMERA https://cdn1.storehippo.com/s/59c9e4669bd3e7c70c5f5e6c/5ff803ab9837c4564362aa32/webp/mfg_ucam-iii.webp

Description:

The uCAM-III (microCAM-III) is a highly integrated serial camera module which can be attached to any host system that requires a video camera or a JPEG compressed still camera for embedded imaging applications.

The uCAM-III is an updated version of the uCAM-II, but is backward compatible and interchangeable, and has a few enhancements over the previous model which can be taken advantage of (refer Revision History section).

Features:

  • Small size, low cost and low powered camera module for embedded imaging applications.
  • uCAM-III: 5V DC Supply nominal
  • On-board EEPROM provides a command-based interface to external host via TTL serial link.
  • On-board 128KB of RAM, an upgrade over the uCAM-II, which enables complex images with texture
    to be captured without automatic downsampling.
  • UART: up to 3.68Mbps for transferring JPEG still pictures or raw images.
  • On board VGA colour sensor and RAW / JPEG CODEC for different resolutions.
  • Built-in down sampling, clamping and windowing circuits for VGA, QVGA or 160x120 image resolutions.
  • Built-in colour conversion circuits for 16-bit CrYCbY, 8-bit gray, 16-bit RGB or standard JPEG images.
  • No external DRAM required.
  • Additions lenses available
  • Locking nut for locking focus in place
CS-1613-1369-ND
in stockINR 4999
4D Systems Pty Ltd
1 1
XYZ Blog title
ABC Blog title here
MODULE MICRO SERIAL JPEG CAMERA

Description of product

Description:

The uCAM-III (microCAM-III) is a highly integrated serial camera module which can be attached to any host system that requires a video camera or a JPEG compressed still camera for embedded imaging applications.

The uCAM-III is an updated version of the uCAM-II, but is backward compatible and interchangeable, and has a few enhancements over the previous model which can be taken advantage of (refer Revision History section).

Features:

  • Small size, low cost and low powered camera module for embedded imaging applications.
  • uCAM-III: 5V DC Supply nominal
  • On-board EEPROM provides a command-based interface to external host via TTL serial link.
  • On-board 128KB of RAM, an upgrade over the uCAM-II, which enables complex images with texture
    to be captured without automatic downsampling.
  • UART: up to 3.68Mbps for transferring JPEG still pictures or raw images.
  • On board VGA colour sensor and RAW / JPEG CODEC for different resolutions.
  • Built-in down sampling, clamping and windowing circuits for VGA, QVGA or 160x120 image resolutions.
  • Built-in colour conversion circuits for 16-bit CrYCbY, 8-bit gray, 16-bit RGB or standard JPEG images.
  • No external DRAM required.
  • Additions lenses available
  • Locking nut for locking focus in place