LoRa Raspberry Pi Gateway with Enclosure
SHOP FOR
LoRa Raspberry Pi Gateway with Enclosure

Description of product

Description:

LoRa is a fantastic advancement in the field of wireless communication. The multi-kilometer distances are incredible! Point to point LoRa has been nailed down with various low cost Semtec based modules like the RFM95 but the true power of an open IoT network is LoRa gateways. These provide public access accross the globe to any LoRa node as long as the node follows the guidelines (don't use more than your share of bandwidth). But what gateway do you need?

The LoRa Raspberry Pi Gateway is a professional grade gateway with the hacker in mind. While other low cost gateways are a single channel, the LoRa Raspberry Pi Gateway comes with a fully heat-sinked concentrator capable of multi-channel, multi-node communication all running in a friendly, hackable Raspberry Pi environment.

The LoRa Raspberry Pi Gateway uses the high-power multichannel SX1301 processing engine specifically designed for LoRa gateways. If you're just experimenting with LoRa, a single channel gateway is a fine way to go; we offer the ESP32 1-Channel LoRa Gateway based on the SX1276/78 RFM95 module. But if you're planning on having multiple, public LoRa nodes you'll need a proper gateway like the LoRa Raspberry Pi Gateway.

Designed for the US and Australia, the 915MHz LoRa gateway comes fully assembled in a black anodized aluminum enclosure using the Raspberry Pi 3B+ as its backbone. With this upgraded model you no longer need to provide your own microSD card (16 GB card included) & there are handy instructions on flash the LoRa Gateway image to the MicroSD card. We recommend using Resin to create your Linux image. RAK Wireless (the makers of the gateway) have a well written tutorial guiding you through the setup. The gateway includes a 2dBi 915MHz antenna and a multi-frequency GNSS(GPS) antenna.

Includes:

  • Fully assembled gateway
    • 915MHz LoRa concentrator shield
    • GPS shield
    • Raspberry Pi 3 B+
    • Aluminum enclosure w/ integrated heatsink
  • Power supply (5V/2.5A)
  • 16GB MicroSD card
  • Magnetic mount GPS/GNSS antenna 1m with SMA
  • 915 MHzLoRa compatible antenna Antenna (2dBi Gain / 50 Ω)

Features:

  • LoRa Concentrator Engine: Semtech SX1301
  • Sensitivity up to -142.5 dBm
  • New Model integrates Ublox MAX-7Q GPS module
  • Max output power up to 350mW or 25.5dBm
  • Range up to 15 km (Line of Sight), ~2km in dense urban areas
  • Designed for 915MHz US/Australia LoRA ISM band
  • Emulates 49 x LoRa demodulators, 10 programmable parallel demodulation paths, 8 uplink ch, 1 downlink ch
  • Temperature: -40 to 85 C
  • 2x SX1257 as Tx/Rx front-ends
  • SMA connector for GPS/GNSS antenna
  • RP-SMA connector for 915MHz antenna
  • Sleek and compact anodized enclosure: 68.3 mm x 92 mm x 53.5 mm
  • FCC & CE compliance