Description of product

Overview
            LC 4-road L298N motor drive module equip with two L298N chip, and can drive four DC motor, to achieve positive inversion and motor speed control. Module with LM2596S buck chip, it can output DC5V for other use when the input voltage greater than 7V.
 
Introduced the hardware and instructions
  • Drive peak current IO: 2A
  • Maximum power consumption: 50W (T = 75 ℃)
  • Power supply for logic part Vss: +5 V to +7 V (default connect to +5 V)
  • Operating current for logic part: 0 ~ 36mA
  • The voltage of control signal: low level: -0.3V≤Vin≤1.5V (control signal is invalid), high level: 2.3V≤Vin≤Vss (control signal is valid)
  • Onboard multiple 5V power supply output

Introduced the hardware and instructions
  • Board size: 59.1*64mm
Functions of the board:

Interface description:
VCC,GND: power supply;
OUT1, OUT2: DC motor 1 interface
OUT3, OUT4: DC motor 2 interface
OUT5, OUT6: DC motor 3 interface
OUT7, OUT8: DC motor 4 interface
IN1-IN8: motor logic control terminal
IN1 / IN2 : control motor 1
IN3 / IN4 : control motor 2
IN5 / IN6: control motor 3
IN7 / IN8 : control motor 4.
EN1: Enable side of motor 1
EN2: Enable side of motor 2
EN3: Enable side of motor 3
EN4: Enable side of motor 4.
S1: power switch
5V: 5V voltage output

 
L298N motor drive module four motor drive intelligent car drive motor module L298N motor drive module four motor drive intelligent car drive motor module L298N motor drive module four motor drive intelligent car drive motor module L298N motor drive module four motor drive intelligent car drive motor module