SHOP FOR
Hardware Debuggers XDS110 PRODUCT

Description of product

Description

The TMDSEMU-110 replaces the XDS100 family while supporting a wider variety of standards (IEEE1149.1, IEEE1149.7, SWD) in a single pod. Also, all XDS debug probes support Core and System Trace in all ARM and DSP processors that feature an Embedded Trace Buffer (ETB). This debug probe connects to the target board via a TI 20-pin connector (with multiple adapters for TI 14-pin and, ARM 10-pin and ARM 20-pin) and to the host PC via USB2.0 High Speed (480Mbps). This device also features two additional connections. It has the Auxiliary 14-pin port connector that enables EnergyTrace™, a full duplex UART port, and four General-Purpose I/Os. It also has the Expansion 30-pin connector to connect the EnergyTrace™ HDR pod.

FEATURES

  • Basic debug communications to the target system
    • IEEE 1149.1 (JTAG)
    • IEEE 1149.7 (cJTAG)
    • ARM serial wire debug (SWD)
  • Enhanced and auxiliary debug communications
    • Support for trace capture through ARM serial wire output (SWO) – UART mode only
    • Support for UART communications to and from the target system
    • Support for GPIO channels
  • Target I/O voltage support from 1.8V to 3.6V
  • Power profiling features
    • Support for TI EnergyTrace
  • Host communications
    • USB 2.0 high-speed (HS) communication link to the debug host system
    • Probe power through USB 5V supply
  • Expansion
    • A 30-pin expansion interface that can support a wide array of auxiliary functions
  • Target power can be supplied from the probe