SHOP FOR
https://www.tenettech.com
# 2514/U, 7th 'A' Main Road, Opp. to BBMP Swimming Pool, Hampinagar, Vijayanagar 2nd Stage. 560104 Bangalore IN
Tenettech E-Store
# 2514/U, 7th 'A' Main Road, Opp. to BBMP Swimming Pool, Hampinagar, Vijayanagar 2nd Stage. Bangalore, IN
+918023404924 https://cdn1.storehippo.com/s/59c9e4669bd3e7c70c5f5e6c/ms.settings/5256837ccc4abf1d39000001/webp/59dafe26aef6e1d20402c4c3-480x480.png" info@tenettech.com
5b6929b83b6fc23cc2a46ee5 Digispark Kickstarter Attiny85 USB Micro Development Board https://cdn1.storehippo.com/s/59c9e4669bd3e7c70c5f5e6c/ms.products/5b6929b83b6fc23cc2a46ee5/images/5b6929b83b6fc23cc2a46ee6/5b69296ff1e9dd3cc145732b/webp/5b69296ff1e9dd3cc145732b.png

Product Details:

Power via USB or External Source - 5v or 7-35v (automatic selection)
Memory 8k Flash Memory (about 6k after bootloader)
Size 1.8cm x 2.6cm
Interface I2C and SPI (vis USI)
Support Arduino IDE 1.0+ (OSX/Win/Linux)


The Digispark is an Attiny85 based microcontroller development board similar to the Arduino line, only cheaper, smaller, and a bit less powerful. With a whole host of shields to extend its functionality and the ability to use the familiar Arduino IDE the Digispark is a great way to jump into electronics, or perfect for when an Arduino is too big or too much.

Product Description 

  • Brand new and high quality.
  • Support for the Arduino IDE 1.0+ (OSX/Win/Linux).
  • Power via USB or External Source - 5v or 7-35v (automatic selection).
  • On-board 500ma 5V Regulator.
  • Built-in USB (and serial debugging).
  • 6 I/O Pins (2 are used for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB).
  • 8k Flash Memory (about 6k after bootloader).
  • I2C and SPI (vis USI).
  • PWM on 3 pins (more possible with Software PWM).
  • ADC on 4 pins.
  • Power LED and Test/Status LED (on Pin0).
  • Size: 1.8cm x 2.6cm .
TT-RG-B5
in stock INR 250
1 1
XYZ Blog title
ABC Blog title here
Digispark Kickstarter Attiny85 USB Micro Development Board

Description of product

Product Details:

Power via USB or External Source - 5v or 7-35v (automatic selection)
Memory 8k Flash Memory (about 6k after bootloader)
Size 1.8cm x 2.6cm
Interface I2C and SPI (vis USI)
Support Arduino IDE 1.0+ (OSX/Win/Linux)


The Digispark is an Attiny85 based microcontroller development board similar to the Arduino line, only cheaper, smaller, and a bit less powerful. With a whole host of shields to extend its functionality and the ability to use the familiar Arduino IDE the Digispark is a great way to jump into electronics, or perfect for when an Arduino is too big or too much.

Product Description 

  • Brand new and high quality.
  • Support for the Arduino IDE 1.0+ (OSX/Win/Linux).
  • Power via USB or External Source - 5v or 7-35v (automatic selection).
  • On-board 500ma 5V Regulator.
  • Built-in USB (and serial debugging).
  • 6 I/O Pins (2 are used for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB).
  • 8k Flash Memory (about 6k after bootloader).
  • I2C and SPI (vis USI).
  • PWM on 3 pins (more possible with Software PWM).
  • ADC on 4 pins.
  • Power LED and Test/Status LED (on Pin0).
  • Size: 1.8cm x 2.6cm .