Counter Click

Description of product

Counter click carries an LS7366R 32-bit quadrature counter. The top of the board has a pinout for interfacing with incremental encoders. The interface has ENCA and ENCB pins, along with ENCI, which is a programmable index. The A and B pulses fron an encoder are out of phase to each other, ideally by 90º. The LS7366R CMOS counter takes these signals as inputs and decodes them for determining direction and speed. On the other side, Counter click communicates with the target board microcontroller through the mikroBUS SPI interface (CSK, MISO, MOSI), plus enable (CNT EN) and interrupt (LFLAG) pins. The board can use either a 3.3V or a 5V power supply.

SPECIFICATION
 
TypeRotary encoder
ApplicationsMeasuring RPM and speed of DC motor shafts
On-board modules    LS7366R 32-bit quadrature counter
Key FeaturesPinout for receiving A and B pulses from incremental encoders
Key BenefitsAllows non-quadrature up-down counting. High resolution (32-bit)
InterfaceGPIO,SPI
Input Voltage3.3V or 5V
CompatibilitymikroBUS
Click board sizeM (42.9 x 25.4 mm)

Downloads