Cameras & Camera Modules MY-CAM003M Camera Module
SHOP FOR
Cameras & Camera Modules MY-CAM003M Camera Module

Description of product

Description

MYIR Tech MY-CAM003M MIPI Camera Module works with the i.MX 8M Quad processor-based MYD-JX8MX development board. The module is connected with the board through a MIPI-CSI interface (24-pin FPC connector). It supports resolution up to 2592x1944 pixels. It uses an OV5640 image sensor which is a 5MP CMOS camera. The module measures 59x33mm and features low power consumption, and high performance for use in various products.

Features

  • Active Array Size: 2592x1944
  • Power Supply
    • Core 1.5VDC ± 5% (with embedded 1.5V regulator)
    • Analog 2.6 ~ 3.0VDC
    • I/O 1.8V to 2.8V
  • Power Requirements
    • Active 140mA
    • Standby 20μA
  • Temperature Range
    • Operation -30℃ to 70℃ junction temperature
    • Stable Image 0℃ to 50℃ junction temperature
  • Output Formats 8-/10-bit RGB RAW data
  • Lens size 1/4″
  • Lens chief ray angle 24°
  • Input clock frequency 6~27MHz
  • Max S/N Ratio 36dB (maximum)
  • Dynamic Range 68dB @ 8x gain
  • Maximum Image Transfer Rate
    • QSXGA (2592x1944) 15fps
    • 1080P 30fps
    • 1280x960 45fps
    • 720p 60fps
    • VGA (640x480) 90 ps
    • QVGA (320x240) 120fps
  • Sensitivity 600mV/Lux-sec
  • Shutter Solling shutter / frame exposure
  • Maximum Exposure Interval 1964 x tROW
  • Pixel Size 1.4x1.4μm
  • Dark Current 8mV/s at 60℃ junction temperature
  • Image Area 3673.6x2738.4μm
  • Package Dimensions 5985x5835μm

Related products