Winter time can be rough in the city. The sky is gray. The weather is unpredictable. So slough off those seasonal blues with some Times Square razzle dazzle from this sweet, ultra-high-density 64x64 RGB LED Matrix. These panels are typically used to make video walls.They have 4,096 bright RGB LEDs arranged in a 64x64 grid at a 3mm pitch. 

Many add-ons or drivers use only a 4-address (ABCD) setup. You can use these matricies with our RGB Matrix Bonnet for Raspberry Pi, RGB Matrix HAT (you'll need to connect a solder jumper) or Matrix Portal (ditto, jumper required). Other libraries such as our Arduino shield with Adafruit library or our HDMI driver boards don't support 5-address multiplexing!

The SmartLED Shield in combination with the Teensy 3.5/3.6 has the hardware for driving these 5-address panels, and enough RAM to refresh the 4096 pixels, however the power plug must be manually soldered/adapted because the shield overlaps it.

Full Kit Contents:

• 64x64 RGB panel
• IDC ribbon cable (~16cm)
• power cable (~50cm)

Features

• Brightness: 2800cd/square meter
• Size: 192mm x 192mm
• Pitch: 3M
• 5 Addressable Pins
• Compatible with M3 mounting screws
• Scan: 1/32
• Refresh Frequency: >=400HZ
• Waterproof Class: IP43
• Weight: 235g (only matrix panel) / 269g (w/ components)