Adafruit STEMMA Wired Tactile Push-Button Pack is colorful round tactile button switches that are already assembled onto a PCB. Each switch comes with a candy-colored round cap snapped on and has a pull-up resistor installed. The pack comes with one of each color of caps (blue, white, yellow, red, and black). The pins are normally open (disconnected), and when the button is pressed, they are momentarily closed. Each push-button board comes with a JST-PH 2mm connector and a matching JST PH 3-Pin to male header cable (200mm) to make wiring easy. The user simply plugs the cable in and then uses the black wire to connect to a microcontroller/microcomputer ground. The white wire is connected to the input signal pin. The red wire can be connected to the power pin (3V or 5V) if the user wants to have the pull-up resistor activated.
Subscribe to get Email Updates!
Thanks for subscribe.
Your response has been recorded.
Tenet Technetronics focuses on “Simplifying Technology for Life” and has been striving to deliver the same from the day of its inception since 2007. Founded by young set of graduates with guidance from ardent professionals and academicians the company focuses on delivering high quality products to its customers at the right cost considering the support and lifelong engagement with customers. “We don’t believe in a sell and forget model “and concentrate and building relationships with customers that accelerates, enhances as well as provides excellence in their next exciting project.